Selvage cloth standard: When the need to mark the desired width of the one-off case according to point it out, called selvage trademark. This process avoids many of the disadvantages of the cutting edge but lower yield. Similarly with flat / satin points, characterized by soft, pretty. More suitable for higher clothing supplies, such as fashion, suits, etc., is very particular about the quality of Japanese firms with the largest machines also do pay attention to Japan. Selvage standard generally do satin standard, but difficult to express satin background, commonly used hot color / stain and other technology to solve this problem.
Selvage machine there are two wooden spindle machine and crochet machines.
Wood spindle machines (including Taiwan-spindle machines, Japanese wood spindle machine of the points), characterized by: the trademark weaving from one machine is complete, so the sides are edging, the same color weft case from beginning to end, is not even together, soft. Disadvantages: low productivity, can use only five of the following colors.
Crochet machine, the same can weave a variety of quality craft can even add a transparent polyester yarn in the warp, and called fishing line crochet machine. Features identical wooden spindle machine marks, but non-spindle machine, but knitting, weft and therefore relatively tight, strong. Usually used as a hot color, the use by the weft different features to make the transfer and high temperature paint the floor. This breed classes trademarks higher costs. In addition to the width of the underlying cost structure of cloth, colored chief, craft the outside, there is a variety of the yarn used. JB series of yarn for the international common.
Trimming cloth standard: use the machine for the West German machine. As the name suggests, on a dedicated high-speed machines, like fabric woven as a whole piece, and then cut into strips the width according to the subject. Because the heat melting characteristics of polyester yarn in cut time will stick to each other, not casual side. Also because of this reason, a certain look and feel will be affected by the impact of a good machine would have been better, with ultrasonic cutting would be better than an ordinary electric knife. Cloth standard cartridge, and can be sent directly to the garment factory finishing process; if demanding, yet to be cut off processing. Because this machine a maximum width of 20.8cm, That mark can weave this width, it can be processed into various shapes.
According to the classification process can be divided into standard and satin standard flat two categories.
Flat cloth: cloth such as cloth structure, a simple interwoven weft once called simple plane marked down. Generally warp are fixed, or black, or white, so there are black levels and white levels of the points, light-colored background standard, generally with the white, dark black levels are generally used. Fabric patterns and colors are subject to express weft, the color will be expressed as the intersection of the warp effect is not the same but vary. Due to general types of machines have restricted the use of weft colors it can express will be limited, generally less than eight kinds. From the foregoing, the price structure factors: the underlying fabric width, which used the warp amount; cloth standard length, the length of each color along the warp direction. In order to express richer detail and color, the weft are doubled, called duplex standard, if a kind of color need more three-dimensional, coupled with a heavy yarn, called heavy shuttle. In addition to washing and sizes, but they use a flat-sided standard. Are expressed yarn cloth pattern, certainly there are differences with the original graphic design, it is impossible not bigger sample to confirm the goods.
Satin cloth: cloth, warp and weft are interwoven cross, in addition to improving the quality can be doubled through the weft through the warp there is doubled, this process is satin structure. By doubling the warp yarns, fabrics and thus become subject texture soft and smooth. Because the warp after doubling the density is too great, the expression pattern of the weft is not well, the bottom color can not do very flexible. Can only appear after a certain color requirements by step. A machine is set to make flat or satin, generally are relatively fixed. General satin trimming width can not exceed 10.8CM, generally not exceeding selvage 5.0CM.
The role and use of woven labels
Woven label: personality, character, fashion is fashion designer who most want to reflect and trademark plays an important role. Computer weaving is widely used, the popularity of all kinds of clothing, footwear, home textiles, toys, handbags, luggage, tie on the main standard, washing mark, size standard, decorative and other standard. Processing flexible, eager, ultrasound and laser laser for a variety of widths (1-20CM), plus up catcher, the refined variety badge, badges, armbands, badges, etc., in terms of technology has reached the level of U.S. and European sync. Wood spindle machines for high-end apparel trademark or underwear, trademark smooth, delicate, exquisite and elegant; crochet trademark for brand clothes, thick plump texture, smooth margins, fonts, highlighting, you can also add weave fishing line, so weave Standard fuller, highlighting effect. Wood machine, crochet trademark plus a special process, or hot colors, dyed, superior. Trademark counterfeiting is a special silk yarn, weaving the site in need of security, after UV irradiation, the security of the site's logo and pattern can become red, yellow, green and other colors.
